#Schlage keyless lock troubleshooting code
#Schlage keyless lock troubleshooting professional

#Schlage keyless lock troubleshooting professional

At this point, we recommend contacting Schlage customer service or a professional locksmith to take a closer look at your lock. However, if you can’t lock the door with a physical key, it could mean something is broken or jammed in the deadbolt’s mechanics. If that works, you might have a problem with the touchscreen or the battery. The final troubleshooting step that you can follow is to lock it with a physical key. The Schlage button will flash green, indicating that you’ve successfully reset your lock.Ĭontinue to the next troubleshooting step if the issue persists.

#Schlage keyless lock troubleshooting code

Enter your unique six-digit programming code (or 40-bit keycode) and press the Schlage button.

Remove the battery pack from the back of the lock and press and hold the button for 15 seconds.

To fix this problem, you can reset the lock by following the below mentioned steps. If your Schlage keypad lock won’t lock, it could be because of a programming error. If you are indeed inserting the key correctly, then something else must be wrong with your lock.

This is the correct side to insert your key into and turn counterclockwise until you hear a click. You should see a vertical slit with a horizontal slit in it on the side that says “Schlage” on it. Hold the lock horizontally and turn it over to examine both sides of the keyhole. The first thing to do is make sure your eyes aren’t playing tricks on you. If you’ve been using the key for a while, you might be putting it in upside down and accidentally locking it that way. When you have a Schlage keypad door lock that’s not locking, the first thing to do is make sure you’re locking it correctly. The lock should now be set to “locked,” and it should lock when you press any button or close your door. If you feel a resistance while entering your code, then your lock is set to “unlocked.” Simply twist the key counterclockwise (to left) until you hear one beep. While holding the key in place, enter your code on the keypad. Then, twist the key clockwise (to right) as far as it will go and hold it there. To check on this, insert a Schlage key into the keyhole. So, if you can’t figure out why your Schlage keypad lock is not locking, the first thing you should check is whether your lock is set to “unlocked.” The only problem is that sometimes, people forget to switch back to locked mode at night. The Schlage FE595 keypad lock has a special setting that allows you to always keep your door unlocked? Sure, it might not be the safest feature (we don’t recommend using it), but it’s great for when you have people coming and going from your home throughout the day. Check Whether Your Lock Is Set To Unlocked (Schlage FE595 Only) Therefore, replace the old batteries with new ones and then retry locking the door. If the indicator light on the keypad is blinking, this means you’ve got a power problem and should swap out the batteries. The Schlage keypad lock requires four AA batteries to function. If your lock won’t lock or unlock, first check that you have fresh batteries installed. Many electronic locks are powered by batteries, and batteries can lose their charge over time. The following will cover common suggestions of what you may need to change in order to solve your problem. Each issue has to be eliminated and then when you’re left with no issues, your door will lock correctly. Troubleshooting a Schlage keypad lock that won’t lock is something I’ve done quite a few times but it’s always tough when there are a lot of different issues. Troubleshooting A Schlage Keypad Lock That Won’t Lock Troubleshooting A Schlage Keypad Lock That Won’t Lock.